Over 30 Years of Value Thru Innovation


Material Technology
Metpump products are 100% bonded refractory with no joints. Fine colloidal silica particle size promotes extraordinary bonding properties. Metpump products exhibit superior hot strength and mechanical strength. They also resist thermal shock, creep, erosion, abrasion and chemical attack.

Installation Technology
MMI Metpump system is delivered in 2 components: Metpump dry powder and Metset liquid binder. The product is mixed on site. Once combined, the product can be poured, pumped or shotcreted in the place of application. Our products are formulated for pumpability without dilution. Material is applied at a rate of 5 tons per hour for shotcreting and 10 tons an hour for pumping without sacrificing the quality of the final product.

Dry Out
Metpump sol-gel bonded refractory products offer the fastest possible dry-out. MMI’s dry-out time is half the required time for a traditional or cement bonded dry-out. Metpump products are unique as they do not contain any chemically bonded water. No chemically bonded water means that all free water is removed from the refractory once the temperature reaches 100°C (212°F).

Product Line
  • Abrasion Resistant
  • Aluminum Industry
  • Blast Furnace Reprofile
  • Cement Industry
  • Casthouse Products
  • Copper Industry
  • Ferro Alloy Products
  • Glass Industry Products
  • Other Applications
  • Reheat Furnace Pumpables
  • Reheat Furnace Shotcretes
  • Steelmaking

223 W. Interstate Road • Addison, Illinois 60101 • USA • (630)543-6660 • © Magneco/Metrel, Inc. Follow MagnecoMetrel on Twitter

Contact Us Products Applications Photo Gallery AboutUs